Leuze LES 36 Series, Original Operating Instructions

Page: 57 / 152

Display and control panel
Leuze electronic LES 36 54
TNT
35/7-2
4
V
If, for PROFIBUS devices, no PROFIBUS is detected following power-
on,
no PB appears in the middle of the bottom line.
The following options are available for the sensor status: fRun means
Free Running, Trig means triggered (see chapter 4.2.3 "Triggering - Free Running") and
!ACK means that the sensor is deactivated (no laser line, see chapter 4.2.2 "Activation - laser
on/off").
Command mode
If the LES is connected to a control, the control can put the LES into a command mode in
which it receives and executes commands (see chapter 10.2.9 "Evaluation telegram"). In
command mode, the OLED display has one line.
Command Mode appears on the first line of the display.
Note!
If errors occur during operation, these are shown on the display. Notes can be found in
Chapter 12.3.
T00 no PB fRun
Command Mode