Lenze 8400 motec Series, Software Manual, Page: 258 / 376

8400 motec | Software Manual
Parameter reference
Parameter list | C00159
258
L
Firmware
≤
02.00 - DMS 2.1 EN - 03/2011
C00159
C00161
C00165
Parameter | Name:
C00159 | Cause for quick stop QSP
Data type: UNSIGNED_16
Index: 24416
d
= 5F60
h
Bit-coded display of the cause/source of quick stop
Display area
(min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded:
Bit 0 Terminal
Bit 1 Reserved
Bit 2 DriveControl Network MCI/CAN
Bit 3 Reserved
Bit 4 Application
Bit 5 Device command
Bit 6 Reserved
Bit 7 Reserved
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Reserved
;
Read access Write access CINH PLC STOP
;
No transfer COM MOT
Parameter | Name:
C00161 | Current error
Data type: UNSIGNED_32
Index: 24414
d
= 5F5E
h
Display range
(min. value | unit | max. value)
0 4294967295
Subcodes Info
C00161/1 Current error
;
Read access Write access CINH PLC STOP
;
No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00165 | Error information
Data type: VISIBLE_STRING
Index: 24410
d
= 5F5A
h
Display of the error numbers divided into sectors in the case of an error
Subcodes Info
C00165/1 Current error
;
Read access Write access CINH PLC STOP
;
No transfer COM MOT