Lenovo ThinkSystem SR850 V2, Service Manual

Page: 43 / 288

Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0162
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSPDM4010I: Inventory data collecting and processing complete for [arg1], sequence number is
[arg2].
Inventory data collecting and processing complete
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0192
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSPEA0001J: Sensor [SensorElementName] has transitioned from normal to non-critical state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0520
User Action:
Use Storcli or LSA to check if there is any warning or critical RAID event.
Service Action:
Complete the following steps until the problem is solved:
1. Review PD Steps.
2. Use Storcli or LSA to check if there is any warning or critical RAID event.
3. Check Lenovo Support for known service bulletins and Tech tips.
4. If problem persists, escalate to next level of support.
Chapter 2
.
XClarity Controller events
39