Lenovo ThinkSystem SR850 V2, Service Manual

Page: 208 / 288

Complete the following steps:
1. If this information event is logged in the XCC event log, the server does not have qualified memory
installed.
2. The memory installed may not be covered under warranty.
3. Without qualified memory, speeds supported above industry standards will not be enabled.
4. Please contact your Local Sales Representative or Authorized Business Partner to order qualified
memory to replace the unqualified DIMM(s).
5. After you install qualified memory and power up the server, check to ensure this informational event
is not logged again.
Service Action:
Complete the following steps:
1. Verify as-build configuration.
2. If DIMM is entitled, perform memory PD.
3. If DIMM is not entitled, advise the customer to contact their sales representative or authorized business
partner.
• FQXSFMA0007I: [arg1] DIMM number [arg2] has been replaced. [arg3]
Severity: Info
User Action:
Complete the following steps:
1. If this information event is logged in the XCC event log, the server does not have qualified memory
installed.
2. The memory installed may not be covered under warranty.
3. Without qualified memory, speeds supported above industry standards will not be enabled.
4. Please contact your Local Sales Representative or Authorized Business Partner to order qualified
memory to replace the unqualified DIMM(s).
5. After you install qualified memory and power up the server, check to ensure this informational event
is not logged again.
Service Action:
Complete the following steps:
1. Verify as-build configuration.
2. If DIMM is entitled, perform memory PD.
3. If DIMM is not entitled, advise the customer to contact their sales representative or authorized business
partner.
• FQXSFMA0008I: DIMM [arg1] POST memory test failure has been recovered. [arg2]
Severity: Info
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
204
ThinkSystem SR850 V2 System Events Service Guide