LEGRAND Server Technology PRO3X, User Manual, Page: 84 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
84 of 182
Determine the default IPv4 firewall control policy for outbound traffic:
config:# security ipAccessControl ipv4 defaultPolicyOut <policy>
IPv6 commands
Enable or disable the IPv6 firewall control feature:
config:# security ipAccessControl ipv6 enabled <option>
Determine the default IPv6 firewall control policy for inbound traffic:
config:# security ipAccessControl ipv6 defaultPolicyIn <policy>
Determine the default IPv6 firewall control policy for outbound traffic:
security ipAccessControl ipv6 defaultPolicyOut <policy>
Variables:
<option> is one of the options: true or false .
Option Description
true Enables the IP access control feature.
false Disables the IP access control feature.
<policy> is one of the options: accept, drop or reject .
Option Description
accept Accepts traffic from all IP addresses.
drop Discards traffic from all IP addresses, without sending
any failure notification to the source host.
reject Discards traffic from all IP addresses, and an ICMP
message is sent to the source host for failure
notification.
Tip: You can combine both commands to modify all firewall control parameters at a time.