Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide
–
Command Line Interface (CLI)
81 of 182
Customizing the Date and Time
To manually configure the date and time, use the following CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to customizing the date and time.
Assign the date:
config:#
time set date <yyyy-mm-dd>
Assign the time:
config:#
time set time <hh:mm:ss>
Variables:
Variable
Description
<yyyy-mm-dd>
Type the date in the format of yyyy-mm-dd.
For example, type
2015-11-30
for November 30,
2015.
<hh:mm:ss>
Type the time in the format of hh:mm:ss in the 24-
hour format.
For example, type
13:50:20
for 1:50:20 pm.
Setting the Time Zone
The CLI has a list of time zones to configure the date and time for PRO3X.
config:#
time zone
After a list of time zones is displayed, type the index number of the time zone or press Enter to cancel.
Example
To set the time zone:
1.
Type the time zone command as shown below and press Enter.
config:#
time zone
2.
The system shows a list of time zones. Type the index number of the desired time zone and press Enter.
3.
Type
apply
for the selected time zone to take effect.
Summary of Contents for Server Technology PRO3X
Page 1: ......