LEGRAND Server Technology PRO3X, User Manual, Page: 116 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
116 of 182
Setting Default Measurement Units
Default measurement units, including temperature, length, and pressure units, apply to the PRO3X user interfaces across all
users except for those whose preferred measurement units are set differently by themselves or the administrator. Diverse
measurement unit commands can be combined so that you can set all default measurement units at a time.
Note: The measurement unit change only applies to the web interface and command line interface.
Set the default temperature unit:
config:# user defaultpreferences preferredTemperatureUnit <option1>
Set the default length unit:
config:# user defaultpreferences preferredLengthUnit <option2>
Set the default pressure unit:
config:# user defaultpreferences preferredPressureUnit <option3>
Variables:
<option1> is one of the options: C or F .
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in Fahrenheit.
<option2> is one of the options: meter or feet .
Option Description
meter This option displays the length or height in meters.
feet This option displays the length or height in feet.
<option3> is one of the options: pascal or psi .
Option Description
pascal This option displays the pressure value in Pascals (Pa).
psi This option displays the pressure value in psi.