LEGRAND Server Technology PRO3X, User Manual, Page: 157 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
157 of 182
Specifying the Rack Unit Numbering Mode
This command syntax specifies the numbering mode of rack units on the asset strips connected to the PRO3X device. The
numbering mode changes the rack unit numbers.
config:# assetStrip <n> rackUnitNumberingMode <mode>
Variables:
<n> is the number of the FEATURE port where the selected asset strip is physically connected. For the PRO3X device with only
one FEATURE port, the number is always 1.
<mode> is one of the numbering modes:
topDown or bottomUp .
Mode Description
topDown The rack units are numbered in the ascending order
from the highest to the lowest rack unit.
bottomUp The rack units are numbered in the descending order
from the highest to the lowest rack unit.
Specifying the Rack Unit Numbering Offset
This command syntax specifies the starting number of rack units on the asset strips connected to the PRO3X device.
config:# assetStrip <n> rackUnitNumberingOffset <number>
Variables:
<n> is the number of the FEATURE port where the selected asset strip is physically connected. For the PRO3X device with only
one FEATURE port, the number is always 1.
<number> is a starting number for numbering rack units on the connected asset strip. This value is an integer number.