LEGRAND Server Technology PRO3X, User Manual, Page: 149 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
149 of 182
Actuator Configuration Commands
An actuator configuration command begins with actuator . You can configure the name and location parameters of an
individual actuator.
You can configure various parameters for one actuator at a time.
Change the name:
config:# actuator <n> name "<name>"
Set the X coordinate:
config:# actuator <n> xlabel "<coordinate>"
Set the Y coordinate:
config:# actuator <n> ylabel "<coordinate>"
Set the Z coordinate:
config:# actuator <n> zlabel "<z_label>"
Modify the actuator's description:
config:# actuator <n> description "<description>"
Variables:
<n> is the ID number assigned to the actuator. The ID number can be found using the PRO3X web interface or CLI. It is an
integer starting at 1.
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be enclosed in quotes when it
contains spaces.
<coordinate> is a string comprising up to 24 ASCII printable characters, and it must be enclosed in quotes.
There are two types of values for the <z_label> variable, depending on the Z coordinate format you set:
Type Description
Free form <coordinate> is a string comprising up to 24 ASCII
printable characters, and it must be enclosed in
quotes.
Rack units <coordinate> is an integer number in rack units.
<description> is a string comprising up to 64 ASCII printable characters, and it must be enclosed in quotes when it contains
spaces.