LEGRAND Server Technology PRO3X User Manual Download Page 69

Page: 69 / 182

Using the PRO3X Command Line Interface (CLI)

PRO3X User Guide

–

Command Line Interface (CLI)

69 of 182

Configuring the Cascading Mode

This command determines the cascading mode.

config:#

network <mode> enabled <option1>

Variables:

<mode> is one of the following cascading modes.

Mode

Description

bridge

The Bridging mode, where each cascaded
device is assigned a unique IP address.

portForwarding

The Port Forwarding mode, where every
cascaded device in the chain shares the same
IP address, with diverse port numbers
assigned.

Important: When enabling either cascading mode, you must make sure the other cascading mode is disabled, or the
preferred cascading mode may not be enabled successfully.

<option1> is one of the following options:

Option

Description

true

The selected cascading mode is enabled.

false

The selected cascading mode is disabled.

If Port Forwarding mode is enabled, you must configure two more settings to finish the configuration:

On ALL cascaded devices, you must configure the 'role' setting one by one.

config:#

network portForwarding role <option2>

On the master device, you must configure the 'downstream interface' setting.

config:#

network portForwarding
masterDownstreamInterface <option3>

Summary of Contents for Server Technology PRO3X























































































































































































Search results

Summary of Contents for Server Technology PRO3X

Reviews:

LEGRAND Server Technology PRO3X, User Manual, Page: 69 / 182

Search results

Summary of Contents for Server Technology PRO3X

Reviews: