LEGRAND Server Technology PRO3X User Manual Download Page 27

Page: 27 / 182

Using the PRO3X Command Line Interface (CLI)

PRO3X User Guide

–

Command Line Interface (CLI)

27 of 182

Environmental Sensor Threshold Information

This command syntax shows the specified environmental sensor's threshold-related information.

show sensor externalsensor <n>

To show detailed information, add the parameter "details" to the end of the command.

show sensor externalsensor <n>

details

Variables:

<n> is the environmental sensor number. The environmental sensor number is the ID number assigned to the sensor, which
can be found on the Peripherals page of the PRO3X web interface.

Displayed information:

Without the parameter

details

only the reading, threshold, de-assertion hysteresis and assertion timeout settings of the

specified environmental sensor are displayed.
With the parameter

details

more sensor information is displayed, including resolution and range.

Note: For a state sensor, the threshold-related and accuracy-related data is NOT available.

Summary of Contents for Server Technology PRO3X























































































































































































Search results

Summary of Contents for Server Technology PRO3X

Reviews:

LEGRAND Server Technology PRO3X, User Manual, Page: 27 / 182

Search results

Summary of Contents for Server Technology PRO3X

Reviews: