LEGRAND Server Technology PRO3X, User Manual, Page: 103 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
103 of 182
Examples
This section illustrates several security configuration examples.
Example 1 - IPv4 Firewall Control Configuration
The following command sets up two parameters of the IPv4 access control feature.
config:# security ipAccessControl ipv4 enabled true defaultPolicyIn accept defaultPolicyOut
accept
Results:
The IPv4 access control feature is enabled.
The default policy for inbound traffic is set to "accept."
The default policy for outbound traffic is set to "accept."
Example 2 - Adding an IPv4 Firewall Rule
The following command adds a new IPv4 access control rule and specifies its location in the list.
config:# security ipAccessControl ipv4 rule add in 192.168.84.123/24 accept insertAbove 5
Results:
A new IPv4 firewall control rule is added to accept all packets sent from the IPv4 address 192.168.84.123.
The newly-added rule is inserted above the 5th rule. That is, the new rule becomes the 5th rule, and the original 5th rule
becomes the 6th rule.
Example 3 - User Blocking
The following command sets up two user blocking parameters.
config:# security userBlocking maximumNumberOfFailedLogins 5 blockTime 30
Results:
The maximum number of failed logins is set to 5.
The user blocking time is set to 30 minutes.