LEGRAND Server Technology PRO3X, User Manual, Page: 133 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
133 of 182
Changing the Sensor Name
This command names an environmental sensor.
config:# externalsensor <n> name "<name>"
Variables:
<n> is the ID number of the environmental sensor that you want to configure. The ID number is available in the PRO3X web
interface or using the command "
show externalsensors <n>
" in the CLI. It is an integer starting at 1.
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be enclosed in quotes when it
contains spaces.
Specifying the CC Sensor Type
Contact closure sensors support the connection of diverse third-party. You must specify the type of connected
detector/switch for proper operation. Use this command when you need to specify the sensor type.
config:# externalsensor <n> sensorSubType <sensor_type>
Variables:
<n> is the ID number of the environmental sensor that you want to configure. The ID number is available in the PRO3X web
interface or using the command "
show externalsensors <n>
" in the CLI. It is an integer starting at 1.
<sensor_type> is one of these types: contact , smokeDetection , waterDetection or vibration .
Type Description
contact The connected detector/switch is for detection of
door lock or door closed/open status.
smokeDetection The connected detector/switch is for detection of the
smoke presence.
waterDetection The connected detector/switch is for detection of the
water presence.
vibration The connected detector/switch is for detection of the
vibration.