manualshive.com logo in svg

LEGRAND Server Technology PRO3X, User Manual, Page: 129 / 182

Share
Download
LEGRAND Server Technology PRO3X User Manual Download Page 129

 

 

 

Using the PRO3X Command Line Interface (CLI) 

 

PRO3X User Guide 

–

 Command Line Interface (CLI) 

 

129 of 182 

 

 

 

Examples: 

Change the IP address of the 1st LDAP server

 

 

config:#

 

       authentication ldap modify 1 host 192.168.3.3

 

 

Change both the IP address and TCP port of the 1st LDAP server

 

 

config:#

 

      authentication ldap modify 1 host 192.168.3.3 port 633

 

 

Change the IP address, TCP port and the type of the L1st DAP server

 

 

config:#

 

      authentication ldap modify 1 host 192.168.3.3 port 633 serverType activeDirectory

 

 

 

Removing an Existing LDAP Server 

This command removes an existing LDAP server from the server list. 

config:#

 

authentication ldap delete <server_num>

 

Variables: 

 

<server_num> is the sequential number of the specified server in the LDAP server list. 

 

Radius Settings 

All Radius-related commands begin with 

authentication radius

. 

If you enable Radius authentication, you must add at least one Radius server. Later you can modify or delete any existing 
Radius server as needed. 

 

 

 

bindDN <bind_DN> 

Change the bind DN. 

▪

 

<bind_DN> is the new bind DN. 

bindPassword 

Change the bind DN password. 

d.

 

First add the "bindPassword" parameter to the command, and press Enter. 

e.

 

The system prompts you for the input of the password. 

f.

 

Type the password and press Enter. 

sortPosition <position> 

Change the priority of the server (that is, resorting). 

▪

 

<position> is the new sequential number of the server in the LDAP server 
list. 

Summary of Contents for Server Technology PRO3X























































































































































































Reviews:

No comments