LEGRAND Server Technology PRO3X, User Manual, Page: 169 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
169 of 182
Testing the Network Connectivity
This ping command sends the ICMP ECHO_REQUEST message to a network host for checking its network connectivity. If the
output shows the host is responding properly, the network connectivity is good. If not, either the host is shut down or it is not
being properly connected to the network.
diag> ping <host>
Variables:
<host> is the host name or IP address whose networking connectivity you want to check.
Options:
You can include any or all of additional options listed below in the ping command.
Options Description
count <number1> Determines the number of messages to be sent.
<number1> is an integer number between 1 and
100.
size <number2> Determines the packet size. <number2> is an
integer number in bytes between 1 and 65468.
timeout <number3> Determines the waiting period before timeout.
<number3> is an integer number in seconds
ranging from 1 to 600.
The command looks like the following when it includes all options:
diag> ping <host> count <number1> size <number2> timeout <number3>