LEGRAND Server Technology PRO3X, User Manual, Page: 118 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
118 of 182
Creating a Role
This command creates a new role, with a list of semicolon-separated privileges assigned to the role.
config:# role create <name> <privilege1>;<privilege2>;<privilege3>...
If a specific privilege contains any arguments, that privilege should be followed by a colon and the argument(s).
config:# role create <name> <privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Variables:
<name> is a string comprising up to 32 ASCII printable characters.
<privilege1>, <privilege2>, <privilege3> and the like are names of the privileges assigned to the role. Separate each privilege
with a semi-colon.
<argument1>, <argument2> and the like are arguments set for a particular privilege. Separate a privilege and its argument(s)
with a colon, and separate arguments with a comma if there are more than one argument for a privilege.
All Privileges
This table lists all privileges. Note that available privileges vary according to the model you purchased.
Privilege Description
acknowledgeAlarms Acknowledge Alarms
adminPrivilege Administrator Privileges
changeAssetStripConfiguration Change Asset Strip Configuration
changeAuthSettings Change Authentication Settings
changeDataTimeSettings Change Date/Time Settings
changeExternalSensorsConfiguration Change Peripheral Device
Configuration
changeLhxConfiguration Change LHX/SHX Configuration
changeModemConfiguration Change Modem Configuration
changeNetworkSettings Change Network Settings
changePassword Change Own Password
changePduConfiguration Change Pdu, Inlet, Outlet &
Overcurrent Protector
Configuration