LEGRAND Server Technology PRO3X, User Manual, Page: 123 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
123 of 182
Add a new LDAP server:
config:#
authentication ldap add <host> <port> <ldap_type> <security> <bind_type> <base_DN>
<login_name_att> <user_entry_class>
"Optional Parameters"
Note: "Optional Parameters" refer to one or multiple parameters listed in the section Optional Parameters (on page 124).
They are required only when your server settings need to specify these parameters. For example, if setting the <bind_type> to
"authenticatedBind", then you must add the parameter "bindDN" to this command.
When the above command is successfully performed, a list of all LDAP servers, including the newly-added one, will be
displayed, which is similar to the following diagram.
Variables:
<host> is the IP address or host name of the LDAP server.
<port> is the port number assigned for communication with the LDAP server.
<ldap_type> is one of the LDAP server types:
openldap or activeDirectory .
Type Description
openldap
OpenLDAP server
activeDirectory
Microsoft Active Directory
<security> is one of the security options: none , startTls or tls .
Type Description
none
No security
startTls
StartTLS
tls
TLS
<bind_type> is one of the bind options: anonymouseBind , or authenticatedBind .
Type Description
anonymousBind
Enable the anonymous Bind.
Bind DN and password are NOT required.
authenticatedBind
Enable the Bind with authentication.
Bind DN and password are required.