LEGRAND Server Technology PRO3X, User Manual, Page: 122 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
122 of 182
Variables:
<option1> is one of the options: local , ldap or radius .
Option Description
local Enable Local authentication only.
ldap Enable LDAP authentication.
radius Enable Radius authentication.
<option2> is one of the options: true or false .
Option Description
true Remote authentication is the first priority. The device
will switch to local authentication when the remote
authentication is not available.
false Always stick to remote authentication regardless of
the availability of remote authentication.
LDAP Settings
All LDAP-related commands begin with authentication ldap .
If you enable LDAP authentication, you must add at least one LDAP server. Later you can modify or delete any existing LDAP
server as needed.
Adding an LDAP Server
Adding an LDAP server requires the entry of quite a lot of parameters, such as the server's IP address, TCP port number, Base
DN and so on.
You can repeat the following CLI command to add more than one LDAP server.
Tip: If any LDAP server's settings are identical to an existing LDAP server's, you can add it by just copying the existing one,
instead of using the following command..