Lamtec ETAMATIC, Manual

Page: 70 / 136

69
9 Appendix
9 Appendix
9.1 Mode Abbreviations Used
Display is set to actual value / status
Short text Description
BE → "Ready" (signal on terminal 58)
ZÜ → "Ignition position" or ignition
EZ → "Setting/Ignition position” (as "Ignition", but ETAMATIC on "Set")
GL → "Base load"
EG → "Setting/Base load” (as "Base Load", but ETAMATIC on "Set")
NA → "Post-ventilation"
AU → "Burner Off" (no signal present)
EL → "Setting"
SL → "Clear memory"
EV → "Setting/Pre-ventilation" (as "Pre- ventilation", but ETAMATIC on "Set")
ES → "Setting/Control"(as "Automatic", but ETAMATIC on "Set")
ST → "Fault"
VO → "Pre-ventilation"
HA
or Hand → "Manual mode" (burner output may be adjusted manually)
no display → Burner set to automatic in operation
LE → external firing-rate (firing-rate controller is disabled by digital input)