95
9
Appendix
WARNING!
P 762 = 0
terminal 46 has no function (ETAMATIC OEM and Burner Control FA1!
P 17 = 3 (FA1 special)
terminal 46 is set to "ignition position acknowledgement!
"Oil pressure > min" / "atomiser air pressure" is not monitored via terminal 46!
You must monitor these signals with the safety interlock chain oil via terminal 51!
47
gas pressure>min
(leakage test)
gas pressure>min
(leakage test)
gas pressure>min
(leakage test)
gas pressure>min
(leakage test))
46
ignition position
acknowledgement
P 762
0 = no function
1 = oil pressure>min /
atomiser air pressure
P 18
0 = oil pressure>min
(atomiser)
1 = atomiser air pres-
sure (rotation atomiser)
P 762
0 = no function
1 =oil pressure>min /
atomiser air pressure
P 18
0 = oil pressure>min
(atomiser)
1 = atomiser air pres-
sure (rotation atomiser)
ignition position
acknowledgement
No
FMS
ETA
Short Text
Description
Min
Max
Default
18
2
2
ÖlpumpON
oil pump ON, 0=standard, 1=together with the fan
0
1
From version 4.2 on
0 = pressure atomiser,
ignition transformer switches output “oil pump” on
and terminal 46 is set to “oil pressure > min”
(ETAMATIC OEM and FA1 only)
1 = rotation atomiser
fan switches on the output “oil pump”
and terminal 46 is set to “atomizer air pressure”
(ETAMATIC OEM and FA1 only)
762
2
4
Fkt.Kl.6
Function terminal 6: 0-recirc. ON signal / 1-oil pressure
> min signal
0
1
0
ETAMATIC:
0 = no function
1 = no function / if P788 = 1, then "recirculation ON"
via PROFIBUS
FMS - terminal 6:
0 = "recirculation ON"
If the recirculation signal is missing during operation,
the recirculation channel remains closed or runs
close.
If P 427 (VODelR) = 0 the recirculation channel
remains close at the pre-ventilation period.
1 = "oil pressure > min"
The internal recirculation signal has always the
state 1.
ETAMATIC OEM / Burner Control FA1 - terminal 46:
0 = no function
1 = "oil pressure>min" with pressure atomiser (P 18 = 0)
or "atomiser air pressure" with by rotation atomiser
(P 18 = 1)
Summary of Contents for ETAMATIC
