Label I Feed Good L, Technical Manual

Page: 83 / 132

i • FeedGood
L
• Technical Guide | 81
Relay Outputs Setting
This is for choosing which functions you want to associate to the
"Relay Output", “3-­Relay Outputs” or “4-­Relay Outputs” options.
Note : the Preference is only displayed if the scale is supplied with
the "Relay Output", “3-­Relay Outputs” or “4-­Relay Outputs”
options.
Note : for more information refer to the documentation attached to
"Relay Output", “3-­Relay Outputs” or “4-­Relay Outputs” options or
contact the Customer Service.
Display: RELAY OUT SET
Options:
No , Lubrication, Knives, Lubrication/Knives, Keyboard
4-­Keys.
Counterknives Parameters Setting
This is used to programme the parameters for automatic actuation
of the counterknives during the mixing wagon cutting cycle.
Note : for more information refer to the documentation attached to
the “3-­Relay Outputs”, “4-­Relay Outputs” and “7-­Power Outputs”
options or contact the Customer Service.
Note : the “COB-­ID#1” item only appears if “L-­Link Port” or
“CAN-­Bus Port” System Preferences have the “Label 5 or label 6”
option set.
Display: COUNTERKNIVES
Options:
•
MODE: No, Semi-­automatic , Automatic.
•
TIME IN(s): 1 … 600 ( 20 ).
•
TIME OUT(s): 1 … 600 ( 20 ).
•
PULSE ON(s): 1 … 60 ( 10 ).
•
PULSE OFF(s): 1 … 60 ( 10 ).
•
TOTAL TIME(min): 1 … 90 ( 20 ).
•
THRESHOLD (kg/lb): 0 … 99.999 ( 0 ).
•
DELAY(s): 0 … 300 ( 0 ).
•
COB-­ID#1: 4-­character alphanumeric ( 18F ).