Label I Feed Good L, Technical Manual

Page: 93 / 132

i • FeedGood
L
• Technical Guide | 91
Setup Code
This is to automatically set the main parameters of the scale
depending on make and model of the mixing wagon.
Note : contact Customer Service to know the Code to be entered.
1. To execute the procedure, select the item “SETUP CODE”,
then press
u . The display shows the previously set Code.
2. Press u to set the Code.
The display shows the icon .
3. Set the Code, then press OK . The display shows the
message “The Settings will be restored. Press OK to confirm
or ESC to cancel.”. If you press
OK the display shows the
message “Restore in progress. Wait...” and at the end the
message “Operation executed correctly.”. Scale settings will
be reprogrammed according to the entered Code.
General Backup
This is to make backups of the Archives and Settings data. The
copies created can also be used to transfer data to another scale.
1. To execute the procedure, select the item “GENERAL
BACKUP”, then press
u . The display shows the message
“Insert the T-­DATA Giga. Press OK to confirm or ESC to
cancel.”. If you press
OK the display shows the message
“Copy in progress. Wait...” and at the end the message “Copy
completed correctly.”.
General Restore
This is to replace the data of the Archives and of the Settings with
a saved copy by using the "General Backup" Utility.
1. To execute the procedure, select the item “GENERAL
RESTORE”, then press
u
. The display shows the message
“Insert the T-­DATA Giga. Press OK to confirm or ESC to
cancel.”. If you press
OK the display shows the message
“Copy in progress. Wait...” and at the end the message “Copy
completed correctly.”.