Label I Feed Good L Technical Manual Download Page 22

Page: 22 / 132

•

FeedGood

• Technical Guide

Keypad

The scale is supplied with 29 mechanical keys.

Key

Name

Function

ON/OFF

Press to switch the scale on and off.

RECIPES

Press to select the Recipes.

ARCHIVES

Press to select the Ingredients, Groups,
Operators and Customers.

MENU

Press to select the commands and functions of
the scale.

START

Press to execute the displayed Recipe.

PAUSE

Press to enable/disable the Weight Hold
Function.

NET/

TOTAL

Press to view the Net Weight or Total Weight in
Manual Weighing.

MAN./

TARE

Press to reset the Net Weight in Manual
Weighing.

>0<

Press to execute the Zero Scale.

Press to select the current Operator.

PRINT

Press to execute printing.

Press to confirm.

Summary of Contents for I Feed Good L





































































































































Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands

Label I Feed Good L, Technical Manual

Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands