Label I Feed Good L, Technical Manual

Page: 27 / 132

i • FeedGood
L
• Technical Guide | 25
Power On
How to switch on i • FeedGood
L
1. Press ON/OFF .
The display shows the Home Screen and the Welcome
Message, then the scale selects Manual Weighing viewing
the Total Weight.
i • FeedGood
L
is ready to execute the operations you
choose.
Note : if you want the scale to switch on automatically as soon
as it is powered, program the "Power On Method" System
Preference.
Note : if you want the scale to switch on automatically at a set
time, program the "Automatic Power On Time" System
Preference.
Note : if you want to customise the Welcome Message,
program the "Welcome Message" System Preference.
Note : if you want the scale to select Recipe Programming
directly after the Welcome Message, program the "Activity at
Power On" System Preference.
Note: during operation of the scale, keep an eye on the
power supply. If the value is correct, the display shows the
icon in steady mode. For further information, see the
"Power Supply" application.
2. If the scale has Operator Management enabled and at least
one Operator with the programmed Password, after the
Welcome Message the display will show the message
"Protection enabled. Enter the Password.”.
Enter the Password to continue. If the Password entered is
correct, the display will show the message “Hello
Operator_Name” for 3 seconds. To change the current
Operator during operation, press
ID and enter the Password
of the new Operator. For further information, see the "Scale
Protect" System Preference.
Note : you can also enter the Administrator Password in place
of the Operator Password.
3