Label I Feed Good L Technical Manual Download Page 51

Page: 51 / 132

•

FeedGood

• Technical Guide

Load and unload

Start  of  weighing  operations.
The display  shows  the Net  Weight  or  Total  Weight  depending
on the view  chosen.

Press

NET/TOTAL

to change the type of view.

Interrupt weighing operations when the displayed weight
reaches the desired value.

Press

MAN./TARE

to reset the Net Weight.

Weight Hold Function

If you must move the mixing wagon during execution, press

PAUSE

to activate the Weight Hold Function. The display

shows “

HOLD

” and the message “LOCKED WEIGHT”. After

having moved the mixing wagon, press

PAUSE

once again to

resume weighing operations.

Maximum Load check

If the  "Maximum  Load"  Weighing  Preference  is  programmed,
during weighing the scale checks  that  the programmed value
is  not exceeded, otherwise  the  display  shows  “

ERR 21

”. For

further information, see “Annex C – Error Codes”.

Summary of Contents for I Feed Good L





































































































































Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands

Label I Feed Good L, Technical Manual

Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands