Label I Feed Good L, Technical Manual

Page: 44 / 132

42 | i • FeedGood
L
• Technical Guide
Note : if the Feeding Balancing Function is enabled, the scale
checks that a Clean-­Up not weighing "0" or an Ingredient is
programmed in the first position of the Recipe, otherwise
disabling the Function.
Note : if the Reload Function is enabled, the scale checks that
first the Ingredients/Clean-­Ups and then the Groups are
programmed in the Recipe, otherwise disabling the Function.
Note : if the Recipe has the Daily Function enabled, the
display shows the message “START EXECUTION MEAL X”,
where “X” indicates the number of the Meal being executed.
Furthermore the scale controls that the sum total of the
percentages programmed in the Meals equals 100, otherwise
preventing the start execution.
During execution, the weight to be dosed is adjusted
depending on the weight loaded/unloaded in the previous
executions.
There are 2 particular cases at the start execution:
•
If you execute a Recipe in which all the elements
have already been weighed completely, regardless
of whether or not all the Meals have been executed,
the display shows the message “Recipe has already
been correctly completed. Do you want to execute
the Recipe again? Press OK to continue or ESC to
exit.”. If you press
OK the scale re-­proposes the
execution of the first Meal.
•
If a Meal was not completed in the previous
execution, the display shows the message “The
Meal X has been partially executed. Do you want to
finish the Meal? Press OK to continue or ESC to
exit.”. If you press
OK the scale proposes to only
weigh the elements which were not weighed
completely previously;; if you press
ESC the scale
proposes execution of the next Meal.