Label I Feed Good L, Technical Manual

Page: 9 / 132

i • FeedGood
L
• Technical Guide | 7
General Information
Before using i • FeedGood
L
it is important to read the information
provided in this Guide to avoid seriously harming yourself or
damaging the scale.
Note: for further information, contact your Distributor or send a
support request to the address support@labelgroup.com .
Important safety standards
•
Carefully read all the documentation attached to the scale.
•
Comply with all the instructions and precautions contained
in this Guide.
•
Only qualified personnel are authorised to assemble and
commission this equipment.
•
Before commissioning the scale, analyse the risks which
could arise from its use, especially regarding personal
safety and that of the plants.
•
Disconnect the connection cables when needing to weld
the mixing wagon.
To keep the welding current from crossing the load cells,
short circuit the metal body of the load cells with a
sufficiently large cable and place the earth clamp as close
to the welding point as possible.
•
Do not expose the scale into contact with aggressive
chemicals or solvents that can affect plastic materials or
corrode metal parts.
1