Label I Feed Good L Technical Manual Download Page 78

Page: 78 / 132

•

FeedGood

• Technical Guide

L-Link Port

This is for choosing the protocol you want to use on the

L-LINK

connector of the scale (CAN-Bus).

Note

: from Label 1 to Label 6 options are not displayed if the

scale is supplied with the “CAN-Bus Port” option. In this case you
must connect the L-Link Remote Terminals to the

L-LINK

connector and the CAN-Bus device to the

CAN

connector.

Note

: some ithems are only available if the scale is supplied with

options.

Note

: contact Customer Service to know the parameter to be set.

Display:   L-LINK
Options:

, L-Link, Label 1, Label 2, Label 3, Label 4, Label 5,

Label  6.

CAN-Bus Port

This is to enable and choose the protocol you want to use with the
"CAN-Bus Port" option.

Note

: the Preference is only displayed if the scale is supplied with

the "CAN-Bus Port" option.

Note

: some ithems are only available if the scale is supplied with

options.

Note

: contact Customer Service to know the parameter to be set.

Display:   CAN
Options:

, Label 1, Label 2, Label 3, Label 4, Label 5, Label 6.

Summary of Contents for I Feed Good L





































































































































Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands

Label I Feed Good L, Technical Manual

Search results

Summary of Contents for I Feed Good L

Reviews:

Related manuals for I Feed Good L

Brands by name

Popular brands