Kyoeisha Baroness LM531, Service Manual

Page: 111 / 161

Replacement of Fuse
Important
If the fuse has blown, there is the possibility of
a short circuit within the electrical circuits.
If so, check the cause such as poor terminal
connections, damaged wiring or terminals, or
incorrectly connected wiring.
Important
When replacing fuses, clean the fuse holder
with compressed air before installing fuses.
Important
To remove the fuse, use the tools in the tool
box.
sen9yf-004
Replacement of Fuse_001
Fusible Link
Fuse capacities of the fusible links are 30 A
and 50 A.
1
2
1qgabk-020
Fusible Link_001
1 Fusible link (30 A)
2 Fusible link (50 A)
Replacement of Fusible Link
Important
When replacing fuses, clean the fuse holder
with compressed air before installing fuses.
The fuse can be removed by pulling it up
away from the holder.
Note:
If the fuse is a type with a cap attached, open
the cap before removing the fuse.
1
2
fb6njc-001
Replacement of Fusible Link_001
1 Fuse
2 Holder
Inspection of Fuse/Fusible Link
The inspection of the fuse and fusible link can
be performed visually.
Follow the steps below to check them.
Remove the fuse/fusible link from the fuse
box/fuse holder.
Check the removed parts to make sure they
are not blown internally.
Note:
If it is difficult to determine visually, use a
circuit tester to check the continuity.
1
2yenzd-001
Inspection of Fuse/Fusible Link_001
1 Blown
1.
2.
Electrical System
LM531
Electrical System
Page 5-27
Electrical components