Kyoeisha Baroness LM531, Service Manual

Page: 112 / 161

Key Switch
Use the key switch to start or stop the engine.
The conductive status of each key position is
described below.
STOP
START
GLOW
ON
OFF
qwkklf-004
30
OFF
ON
GLOW
START
AC 19 50
30
50
19
AC
Key Switch_001
Key Position and Device Operation
ON (Run)
The diesel engine on the machine runs or
stops based on the fuel supply.
When the key is set to the "OFF" position,
the engine stop solenoid is turned off, and
fuel is shut off.
After the engine starts, while the key remains
in the "ON" position, the solenoid works and
fuel is supplied. (This type of solenoid is
always conductive. During operation =
conductive.)
Key [OFF] Plunger [out]
Key [ON] Plunger [in]
OFF
ON
GLOW
START
1
51ealk-001
ON (Run)_001
1 Plunger
￭
Glow (Thermo-Start)
When the ignition key is kept in the "GLOW"
position, the glow plug is generating heat
and the thermo-start lamp is turned on.
The lamp turns off at the specified time.
However, the lamp turning off is not related
to the glow plug generating heat, and the
plug is kept heated as long as the key is in
"GLOW" position even after the lamp is
turned off.
The glow lamp will stay illuminated for five
seconds.
The glow plug is located at engine head of
each cylinder and is connected by the plate.
OFF
ON
GLOW
START
6raejy-001
Glow (Thermo-Start)_001
START
The engine starts by rotating the starter
motor, when the magnet switch of the starter
motor is energized with the key at "START"
position.
The electrical circuit of the starter motor is
such that it does not turn unless the engine
activation conditions of the interlock system
are satisfied.
OFF
ON
GLOW
START
pff35r-001
START_001
￭
￭
LM531
Electrical System
Page 5-28
Electrical components