Adjustment of Parking Brake
Danger
Danger
If the brake wire is cut, the machine will be
unable to stop. This would be extremely
dangerous.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
If the brake is not sufficiently effective, adjust
the brake wire.
Check position of the notch of the parking
brake.
Depressing the brake pedal firmly, move the
parking brake lock lever forward with a foot.
Make adjustments with the adjustment bolt
inside of the tire so that the latch of the
parking brake lock lever is positioned at
arrow A (fourth notch from the bottom).
"Adjustment of Brake" (Page 6-3)
1
3
2
A
ulabms-006
Adjustment of Parking Brake_001
1
Brake pedal
2
Latch
3
Notch
Adjustment of Brake
Danger
Danger
If the brake wire is cut, the machine will be
unable to stop. This would be extremely
dangerous.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
If the brake is not sufficiently effective, adjust
the brake wire.
1.
2.
Important
Adjust to reduce the play in the brake lever as
much as possible so that the brake does not
drag when the lever is released.
Adjust the brake by tightening the brake wire
adjustment bolt.
If there is too much play in the brake lever,
the braking power is reduced and the
brake pedal feel is light.
If there is too little play in the brake lever,
the braking power is increased and the
brake pedal feel is heavy.
4
1
2
3
nfzln9-013
Adjustment of Brake_001
1
Lock nut
2
Adjustment bolt
3
Brake wire
4
Brake lever
Start the engine and drive to check the
following.
Make sure that heat is not generated in
the brake area.
Make sure that the left and right brakes
are equally effective.
Danger
Danger
It would be extremely dangerous and may
result in an unexpected accident if the left and
right brakes are not equally effective.
If the left and right brakes are not equally
effective, make fine adjustments with the
adjustment bolt on the brake wire.
1.
・
・
2.
・
・
3.
Main Vehicle
LM531
Main Vehicle
Page 6-3
Adjustment
Summary of Contents for Baroness LM531
