Kyoeisha Baroness LM531, Service Manual

Page: 35 / 161

Front left frame
rwyt62-058
Jack-Up Points_003
Rear frame
rwyt62-060
Jack-Up Points_004
Pivot
There are two locations.
rwyt62-061
Jack-Up Points_005
2.
3.
4.
Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
1
5
2
3
3
2
3
5
2
4
8bq62b-449
Greasing Points_001
Location
No. of
greasing
points
1 Pedal shaft fulcrum 2
2 Lift arm fulcrum 5
3 Mower unit fulcrum 5
4 Pivot 3
5 Cylinder shaft 4
Maintenance Standards and Maintenance
LM531
Maintenance Standards and Maintenance
Page 3-21
Greasing