Kyoeisha Baroness LM531, Service Manual

Page: 140 / 161

Loosen the slotted nut with a socket wrench.
After loosening the slotted nut, remove the
wheel mounting base bracket F.
1
u5l8nd-026
Removal of Brake Caliper_003
1 Socket wrench
Remove the cotter pin and flat-head pin
connecting the brake wire and cam.
Remove the brake wires of both front and
rear caliper parts.
1
4
2
3
u5l8nd-004
Removal of Brake Caliper_004
1 Caliper
2 Cam
3 Flat-head pin
4 Cotter pin
Do not remove the slotted nut of the wheel
mounting base completely; stop at a position
where it protrudes from the shaft a little.
Remove the wheel mounting base by using a
pulley remover.
Caution
If you remove the wheel mounting base with
the slotted nut removed, the wheel mounting
base and caliper may pop out at you with the
pulley remover, at the moment when the
wheel mounting base is removed.
5.
6.
7.
After removing the wheel mounting base,
remove the slotted nut and disc spring
washer.
1
3
2
u5l8nd-005
Removal of Brake Caliper_005
1 Wheel mounting base
2 Pulley remover
3 Slotted nut
Keep the wheel mounting base and front and
rear calipers as shown in the illustration.
Remove the wheel mounting base and
caliper by sliding them carefully in the arrow
direction along the bracket.
4
3
2
1
u5l8nd-006
Removal of Brake Caliper_006
1 Wheel motor shaft
2 Wheel mounting base
3 Caliper
4 Mount bracket
8.
LM531
Main Vehicle
Page 6-8
Mechanical brake manual