Kyocera TASKalfa 2551ci, Service Manual

Page: 520 / 756

2NP
2-3-13
YC4
18 LIFT_MOT1_
REM O 0/3.3 V DC LM1: On/Off
Connected to
engine
connect
PWB 19 LIFT_MOT2_
ALM O 0/3.3 V DC Alarm signal
20 LIFT_MOT2_
REM O 0/3.3 V DC LM2: On/Off
21 LIFT_FULL2_
SW I 0/3.3 V DC LS2: On/Off
22 PF_PAUSE O 0/3.3 V DC PF control signal
23 PF_SET I 0/3.3 V DC PF sleep return signal
24 PF_RDY I 0/3.3 V DC ready signal
25 PF_SEL O 0/3.3 V DC PF select signal
26 PF_SO O 0/3.3 V DC(pulse) Serial comunication data signal
27 PF_SI I 0/3.3 V DC(pulse) Serial comunication data signal
28 PF_CLK O 0/3.3 V DC(pulse) Clock signal
29 FAN_B_HALF O 0/3.3 V DC CM1 drive change signal
30 FAN_B_FULL O 0/3.3 V DC CM1: On/Off
31 WTC_FULL_I
N I Analog WTDS detection voltage
32 WTC_FULL_
OUT O 0/3.3 V DC WTDS: On/Off
33 ERASER_EN
_BK O 0/3.3 V DC CL-K: On/Off
34 DLP_TH I Analog DEVTH detection voltage
35 TCSENS_BK I Analog TS-K detection voltage
36 TCSENS_M I Analog TS-M detection voltage
37 TCSENS_C I Analog TS-C detection voltage
38 ERASER_EN
_COL O 0/3.3 V DC CL-YCM: On/Off
39 TCSENS_Y I Analog TS-Y detection voltage
40 BLTHP2 I 0/3.3 V DC BDS2: On/Off
41 BLTHP? I 0/3.3 V DC BDS1: On/Off
42 ID_CL_HP_S
W I 0/3.3 V DC IDS: On/Off
43 GND - - Ground
44 DLP_DRUM_
SDA I/O 0/3.3 V DC Data signal
45 GND - - Ground
46 DLP_DRUM_
SCL O 0/3.3 V DC Clock signal
Connector Pin Signal I/O Voltage Description