Kyocera KM-6230 Instruction Handbook Manual Download Page 145

Page: 145 / 160

Section 10 TROUBLESHOOTING

2. If the misfed paper is visible in the ejection slot, pull it out in the direction of ejection

without tearing it.

3. Grasp the front cover handle and open the front cover towards you.

4. Turn the conveyor knob in a clockwise direction. The misfed paper will be returned to

the internal tray and the internal tray can now be pulled out.

5. Grasp the internal tray handle and carefully pull the internal tray out towards you.

IMPORTANT!
Once the internal tray is pulled out, DO NOT attempt to move the internal tray guides

If these guides are moved, there is a danger of damage to the Finisher.

6. Remove the misfed paper without tearing it.

10-14

Summary of Contents for KM-6230

































































































































































Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands

Kyocera KM-6230, Instruction Handbook Manual

Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands