Kyocera KM-6230, Instruction Handbook Manual

Page: 96 / 160

Section 8 COPIER MANAGEMENT
(2) Weekly timer
Power to the copier can be turned ON and OFF automatically at specified times on each day
of the week between Monday and Sunday.
Set the copier to be turned ON early so that it is warmed up and ready for the start of work in
the morning, and set it to be turned OFF automatically in the evening in case nobody remem-
bers to switch it off manually.
* When the weekly timer is turned ON, do not remove the power plug from its power source
and be sure to leave the main switch ON (I) as well.
1
The weekly timer procedures and settings
2
How to enter the weekly timer select mode
1. Touch the “Default” key.
The management mode select screen will appear.
2. Touch the “Week timer” key.
Description Procedure or setting Page
●
Setting the time
●
Programming the weekly
timer
●
Canceling the timer
function
●
Turning the weekly timer
ON/OFF
Follow this procedure to set the present time. If the time is not set correctly here, weekly timer
operation will not be triggered at the expected time.
Follow this procedure to register the times at which the copier is to be turned ON and OFF during
each day of the week. Leave the main switch ON ( | ) and the copier will be turned ON and OFF
automatically at the times scheduled for each day.
When the copier is to be out of use for a whole day (holiday, etc.), cancel the timer function in
advance for the day in question. In this case, the copier will remain OFF for that whole day. On
the same day of the following week, the timer will resume turning the copier ON and OFF at the
times originally registered.
Once you have set the present times using procedure described in “
●
Setting the time”, follow
this procedure to turn the weekly timer ON and thereby activate it, or turn it OFF if it is not
required.
8-8
8-8
8-9
8-10
8-7