Kyocera KM-6230 Instruction Handbook Manual Download Page 87

Page: 87 / 160

Section 7 DOCUMENT MANAGEMENT FUNCTIONS

3. If you want to change the password for that synergy print box, touch the “Password” key.

If you do not want to change the password, go to step 6.

4. Use the numeric keys to enter the new password. (Max. 8 digits)
5. Touch the “End” key. The touch panel will return to the basic screen.

6. If you want to change the name of a set of originals, select the corresponding originals and

touch the “Rename” key.
If you do not want to change the name, go to step 8.
* If the name that you want to change is not displayed, touch the “

▼

” key or the “

▲

” key

until it is displayed.

7. Enter the new name that you want to register for those originals.

(See page 8-9 for the procedure on entering the name.)
Once you are finished changing the name, the touch panel will return to the basic screen.

8. If you want to change the order in which the name of those originals are displayed, touch

the “

Up” key or the “

Down” key until that name is in the position that you want.

9. Touch the “End” key and then press the Reset key. The touch panel will return to the basic

screen.

7-16

Summary of Contents for KM-6230

































































































































































Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands

Kyocera KM-6230, Instruction Handbook Manual

Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands