Kyocera KM-6230 Instruction Handbook Manual Download Page 97

Page: 97 / 160

Section 8 COPIER MANAGEMENT

How to register the various timer settings

●

Setting the time

1. Enter the weekly timer select mode. (See page 8-7.)
2. Touch the “Timer set” key.

3. Set the present time by touching the “+” key or the “-” key for the hour and minutes.

* Enter the time on the 24-hour basis (00:00 - 23:95).

4. Touch the “Enter” key.

The touch panel will return to the weekly timer set-up screen.

5. Touch the “End” key.

The touch panel will return to the basic screen.

●

Programming the weekly timer

1. Enter the weekly timer select mode. (See page 8-7.)
2. Touch the “Week timer” key.

3. Touch the day of the week that you want to set the ON and OFF times for.

3. Use the numeric keys to enter the management pin code “6200”.

If the pin code you entered matches the registered one, the screen will change to the
weekly timer set-up screen. See “

How to register the various timer settings” in order to

make the desired settings.
* You can change the 4-digit management pin code as desired. (See “

Management pin

code change” on page 8-11.)

8-8

Summary of Contents for KM-6230

































































































































































Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands

Kyocera KM-6230, Instruction Handbook Manual

Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands