Kyocera KM-6230 Instruction Handbook Manual Download Page 61

Page: 61 / 160

Section 5 OTHER CONVENIENT FUNCTIONS

4. Touch the program number (“1” to “8”) that you want to register the settings under.

* If you also want to register a name for that program, touch the “Name Registration” key.

(See page 8-29 for the procedure on entering the name.)

5. Touch the “End” key.

The selected copy settings and functions will appear. If you want to check more specific
settings for each copy mode, touch the related function key. Once you are finished check-
ing the settings, touch the “Check” key.

6. Touch the “Register” key for final registration of the settings.

The touch panel will return to the basic screen. Copying is now possible using the settings
that are registered under that program number.

Copying with a registered program

1. Press the Program key.

The program select screen will appear.
* If “Off platen” is selected under “

Job programming” on page 8-16 and there are set-

tings registered under program 1, those copy functions will be automatically displayed. In
this case, go to step 4.

* If “Regular” is selected under “

Job programming” on page 8-16, you can select the

program you want from among those registered. In this case, go to the next step.

2. Touch the number that corresponds to the program that you want to use.

3. The copy functions and settings registered under the selected program will be displayed.

Touch the “Copy” key.
The touch panel will return to the basic screen.

4. Set the originals and press the Start key to start copying with the displayed functions and

settings.

5-28

Summary of Contents for KM-6230

































































































































































Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands

Kyocera KM-6230, Instruction Handbook Manual

Search results

Summary of Contents for KM-6230

Reviews:

Related manuals for KM-6230

Brands by name

Popular brands