manualshive.com logo in svg

Kyocera KM-6230, Instruction Handbook Manual

The Kyocera KM-6230 comes with an extensive Instruction Handbook Manual, providing users with comprehensive guidance on operating and maintaining the product. Accessible for free download on our website, this manual offers detailed instructions and troubleshooting tips, ensuring a smooth and hassle-free experience with your Kyocera KM-6230. [website].

Share
Download
background image

Section 11  SPECIFICATIONS

Type ................................................................... Desk-top

Original table ...................................................... Stationary-type

Copying system ................................................. Indirect electrostatic

Acceptable originals ........................................... Platen: Sheets, books, 3-dimensional (Max. size: 11" x 17")

DF: Sheets (11" x 17" - 8-1/2" x 5-1/2" [vertical-feed], one-sided originals: 35 g/m

2

 - 160 g/m

2

, two-

sided originals: 50 g/m

2

 - 120 g/m

2

)

Copy size ........................................................... One-sided copies: 11" x 17", 8-1/2" x 14", 11" x 8-1/2", 5-1/2" x 8-1/2" [vertical-feed], envelopes [only

when using the printer functions of this machine]

Two-sided copies: 11" x 17" - 5-1/2" x 8-1/2" [vertical-feed]

Print margin loss ................................................ 0.5 mm - 5.5 mm

Copy speed ........................................................ Same-size/memory copying: 11" x 17"- 32 copies/min., 8-1/2" x 14"- 38 copies/min.,

11" x 8 1/2"- 62 copies/min., 8-1/2" x 11"- 44 copies/min.

Warm-up time ..................................................... Within 360 sec. (room temperature: 68˚F, humidity: 65%RH), from energy saving preheat mode:

Within 30 sec. (room temperature: 68˚F, humidity: 65%RH)

First copy speed ................................................. 3.6 sec. (11" x 8-1/2", manual exposure mode)

Copy magnification ratio .................................... Selectable to any 1% increment between 25% and 400% or to standard fixed ratios.

(Selectable between 25% and 200% when copying from the DF.)

Bitmap memory .................................................. 64 MB (Installed)

Image storage memory ...................................... 8.5 GB (Installed)

Resolution .......................................................... Scanning: 600 dpi x 600 dpi

Printing: 600 dpi x 600 dpi

Paper feed system ............................................. Automatic feed from drawers/deck (Two 550 sheet [75 g/m

2

] capacity drawers, one 3,000 sheet

[75 g/m

2

] capacity deck) and stack bypass tray (100 sheet [75 g/m

2

] capacity)

Acceptable copy paper ...................................... In drawers, decks, duplex unit: Standard (60 g/m

2

 - 160 g/m

2

) paper

In stack bypass tray: Standard (60 g/m

2

 - 200 g/m

2

) or special paper (letterheads, colored paper or

Transparencies, etc.), envelopes (DL, C5, COM-10, Monarch) [only when using the printer functions

of this machine]

Continuous copying ........................................... 1 - 999 sheets

Light source ....................................................... Inert-gas lamp

Developing system ............................................. Dual-component dry process

Toner replenishment system .............................. From toner bottle to waste toner tank

Fixing system ..................................................... Heat roller

Cleaning system ................................................ Blade

Photoconductor .................................................. a-Si

Functions and modes ......................................... Self-diagnosis, auto preheat mode, auto exposure adjustment, original size detection, auto paper size

selection, auto magnification selection, zoom copy mode, fixed-size zoom mode, standard zoom mode,

XY zoom mode, photo mode, two-sided copy mode, margin mode, print page numbers function,

page separation mode, border erase mode, sheet copy mode, presentation mode, transp

backing sheet modes, form overlay mode, combined copy mode, booklet copy mode, b cover

copy mode, sort copy mode, invert copy mode, mirror image mode, program mode, change settings

function, job build function, document management functions, copy management functions, weekly

timer mode, default settings, touch panel language selection

Power source ..................................................... 120V AC, 60Hz, 13A

Power consumption ........................................... Rated power consumption (Max. 1560W)

Dimensions (W) x (D) x (H) ................................ 26-15/16" x 31-5/16" x 46-1/16"

685 mm x 795 mm x 1170 mm

Weight ................................................................ Approx. 440 lbs. (200 kg)

Required space (W) x (D) .................................. 53-7/8" x 31-5/16"

1369 mm x 795 mm

Optional equipment ............................................ Side Deck, Finisher, Booklet Stitcher, Mailbox Unit, Key Counter, Print/Scan System, Tandem Board,

Copy Tray

(Specifications are subject to change without notice)

11-1

Section 11  SPECIFICATIONS

Summary of Contents for KM-6230

































































































































































Reviews:

No comments

Related manuals for KM-6230

Sanyo SFT-Z95 Service Manual preview
SFT-Z95
Brand: Sanyo Pages: 294
Olivetti Copia 9916 User Manual preview
Copia 9916
Brand: Olivetti Pages: 526
Olivetti D-COPIA 120D Operation Manual preview
D-COPIA 120D
Brand: Olivetti Pages: 81
Xerox XC356 - Home Office Copier User Manual preview
XC356 - Home Office Copier
Brand: Xerox Pages: 39

Brands by name

Popular brands

Load more brands