Kyocera ECOSYS M2135dn, Operation Manual

Page: 80 / 410

2-32
Installing and Setting up the Machine > Installing Software
4
Install the software.
You can also select [ Use host name for port name ] and set to use the host name of the
standard TCP/IP port. (A USB connection cannot be used.)
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name.
Installation may fail if the host name is specified.
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and that it
is turned on and click
(Reload).
• If the Windows security window appears, click [ Install this driver software anyway ].
• To install Status Monitor on Windows versions preceding Windows 8, it is necessary to
install Microsoft .NET Framework 4.0 beforehand.
3
1
2