Kyocera ECOSYS M2135dn, Operation Manual

Page: 257 / 410

8-11
Setup and Registration (System Menu) > System Menu
Wired Netwk. Set
Configure wired network settings.
Item Description
IPv6 Setting Set up TCP/IP (IPv6) to connect to the network. This setting is available when [ TCP/IP ] is [ On ].
IPv6 Setting Select whether to use IPv6.
Value : Off, On
NOTE
Selecting [ On ] displays IP address in [ Link Local ] after restarting the network.
Manual Settings Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when [ IPv6 Setting ] is set to [ On ].
To enter "Default Gateway", set [ RA (Stateless) ] to [ Off ].
RA(Stateless) Select whether to use RA (Stateless).
Value : Off, On
NOTE
This function is displayed when [ IPv6 Setting ] is set to [ On ].
Selecting [ On ] displays IP address in [ IP Address 1 (to 5) ] after restarting the network.
DHCPv6 Settings Select whether to use the DHCP (IPv6) server.
Value : Off, On
NOTE
This function is displayed when [ IPv6 Setting ] is set to [ On ].
Selecting [ On ] displays IP address in [ IP Address ] after restarting the network.
Restart Network Restarts the network.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
TCP/IP Settings For details on setting value.
TCP/IP Settings (page 8-10)
LAN Interface Specify the settings for the LAN interface to be used.
Value : Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.