KVH Industries TracPhone FB150 User Manual Download

Page: 47 / 140

Chapter 4: Using the web interface

Introduction

Icons in the icon bar

The following icons may appear in the icon bar in the web interface:

Navigating the web interface

•

To expand a menu

, click the menu in the navigation pane.

•

To access status and settings

, click the relevant subject in the navigation pane or

click the relevant icon in the icon bar. The status or settings are displayed in the

contents section.

•

To see the site map

, click

SITE MAP

in the navigation pane. The site map lists

all topics and submenus. Click on items in the site map to go directly to the

relevant location.

Icon

Explanation

A new SMS message, or information of Voice mail,

has arrived.
Click the icon to see new messages or information

of Voice mail. For further information, see

Receiving a message

on page 51.

An event is active.
Click the icon to see a list of active events. For

explanations of the event messages, see

List of

events

on page 111.

Note that this icon will remain in the icon bar as

long as the event is still active.

Summary of Contents for TracPhone FB150













































































































































Search results

Summary of Contents for TracPhone FB150

Reviews:

Related manuals for TracPhone FB150

Brands by name

Popular brands

KVH Industries TracPhone FB150, User Manual

Search results

Summary of Contents for TracPhone FB150

Reviews:

Related manuals for TracPhone FB150

Brands by name

Popular brands