KVH Industries TracPhone FB150, User Manual

Page: 126 / 140

Chapter 5: Troubleshooting
Status signaling 117
08046
Timeout of
startup
sequence - No
antenna or
antenna
temperature too
low
The start-up sequence of
the terminal has timed out
because:
• the antenna is not
properly connected, or
• the antenna
temperature is too low
to start up.
Check that the antenna
cable is properly
connected at both ends.
08048
All PoE ports
except port 1
are shut down
due to high
temperature
The temperature in the
terminal is too high. PoE
port 2 is shut down to
reduce the temperature.
Move the terminal to a
cooler location, or avoid
using PoE on port 2.
08049
Data rate
reduction due
to high
temperature
The bit rate of the data
channel is reduced
because the temperature is
too high.
Move the terminal to a
cooler location
0804B
Illegal
combination of
antenna and
terminal
You are not using the right
combination of antenna
and terminal.
Only use the antenna(s)
intended for use with your
terminal.
0804C
The selected
satellite is
not visible at
current GPS
position
The terminal is set up to
use a satellite that is not
visible at the current GPS
position.
Enter the web interface
and select SETTINGS >
Satellite selection .
Then select Auto to let the
terminal automatically
find the satellite with the
best signal, or select a
satellite visible from your
current position.
0804D
Antenna
firmware image
is missing in
terminal
The software is corrupt. Upload new software to
the terminal. Refer to
Uploading software on
page 86.
ID Event Text Explanation Remedy