Chapter 4: Using the web interface
Setting up the interfaces
85
Configuring the I/O interface
To configure the I/O pins, do as follows:
1. Select
SETTINGS
> Discrete I/O
.
2. For each pin you want to use, select
Enabled
.
3. For each pin, select the function of the pin. Refer to the previous section,
4. If you are using the Ignition function and you want the terminal to stay on for a
few minutes after the Ignition is switched off, enter the number of minutes
under
DELAYED SHUTDOWN
.
For further information on the Ignition function, see
5. If you are using a ringer output, select
Standard
under
RINGER OUTPUT
to
activate the ringer on incoming calls.
6. If you are using a Mute output, select
Standard
under
MUTE OUTPUT
to
activate the ringer on incoming and outgoing calls.
7. Click
Apply
.
Summary of Contents for TracPhone FB150
Page 1: ...User s Guide TracPhone FB150...
Page 132: ......
