Chapter 4: Using the web interface
Administration
99
3. At
ALLOW AT COMMANDS ON:
, select
•
yes
to allow the use of AT commands on the LAN interface, or
•
no
to block the use of AT commands on the LAN interface.
AT commands are low-level commands used to control modems, in this case the
TracPhone FB150 terminal. They are typically used during service and
maintenance or when troubleshooting the terminal.
4. Click
Apply
.
The settings to which access is denied are now greyed out for the non-
administrator user.
Note
This setting does not take effect until the terminal is restarted.
Summary of Contents for TracPhone FB150
Page 1: ...User s Guide TracPhone FB150...
Page 132: ......