KVH Industries TracPhone FB150, User Manual

Page: 109 / 140

Chapter 4: Using the web interface
Administration 100
Remote management
You can set up the terminal so that it can be controlled from a remote location.
To set up the terminal for remote management, do as follows:
1. From the left navigation pane, select ADMINISTRATION > Remote
management .
2. Select whether remote access should be Enabled or Disabled .
3. Type in the Incoming port number.
4. Under TRUSTED IP ADDRESSES , type in the IP addresses of the devices you
want to give access to the terminal.
5. Click Apply .
You can now access the terminal from one of the trusted IP addresses, using the
incoming port defined in the Incoming port field.
Note
We recommend using a static external IP address for the terminal in order to
provide easy access to the terminal. For information on how to set up a static
IP address, refer to step 5. on page 61 in the section Setting up the Default
network user group .
Note
The port number must be available at your service provider.