KVH Industries TracPhone FB150, User Manual

Page: 28 / 140

Chapter 2: Getting started
Standard connection to the Internet (default) 19
Standard connection to the Internet (default)
By default, the terminal does not automatically connect to the Internet when you
connect your computer or other equipment to the LAN interface. You must activate
your connection from the Dashboard in the web interface or from the IP handset.
Activating the connection from a computer (web interface)
To activate the connection from a connected computer, do as follows:
1. Access the web interface by opening your browser and entering http://ut.bgan
or the IP address of the terminal in the address bar.
“http://ut.bgan” translates into the IP address of the terminal (if your computer
is set up as described in Before connecting to the LAN interface on page 14). The
default IP address is 192.168.0.1.
2. Click Start Standard under PROFILES ON LAN at the bottom of the page.
3. Check the connection e.g. by entering a web site.
The field ONGOING DATA SESSIONS will show the IP address for the data
session you started.
Note
This section only describes a Standard Internet connection with default
settings on the terminal. For information on other scenarios, see Setting up
the LAN network on page 59.