KVH Industries TracPhone FB150, User Manual

Page: 42 / 140

Chapter 3: Operating the system
Using the IP handset 33
To request a static IP (if subscribed to) from the APN you must type in the user
name and password from your airtime subscription.
Note for MAC OS: User name and password are required. Use user name
void
and password void . This works for some ISPs. Contact your airtime provider for
further information.
• For setups that have a check box for ‘Enable LCP extensions’, deselect this.
No further configuration is needed to make a Standard IP data connection to the
Internet.
See the table below for information on how to configure specific services for your
PPPoE connection.
If you need a certain service, you must type in a specified text string when asked for
a service name. The following table shows the service names supported by the
terminal.
Using the IP handset
You can use the IP handset as user interface for the TracPhone FB150 system as well
as for making calls.
The IP handset has a dedicated menu for the TracPhone FB150 system. You find a
list of the menu items available in The IP handset on page 21.
For information on how to start up the IP handset, see Connecting the IP handset on
page 13.
For further information on how to use the IP handset, refer to the IP handset User
Manual.
Text to type in the
Service Name field
Function
(Blank) Initiates a Primary Standard Data connection
(default)
XBB:BACKGROUND Initiates a Primary Standard Data connection (Same
as blank!)
XBB:<AT String> This allows the PPPoE clients to enter a full AT
context activation string.
Example:
XBB:AT+CGDCONT=1,ip,”bgan.inmarsat.com”