Kverneland Electrical Control EC, Operation Manual

Page: 10 / 69

Flowmate Control FMC
OPERATING INSTRUCTIONS
10
H2 SYSTEM OVERVIEW AND ASSEMBLY
§2.1 S
YSTEM OVERVIEW
The System Flowmate Control FMC comprises the following components (see fig.):
•
Control box
•
Distribution box
•
SHC box ( s ection- h ydraulic- c ontrol)
The control box is assembled in the tractor cabin and contains the spraying computer and the
remote control for the control of the spraying and hydraulic functions.
The transmission of the control commands is done according to the new CAN bus protocol (ISO
11783) via the control wire and the distribution box to the SHC box on the sprayer (see fig.).
Pressure regulator, Section valves and solenoid valves are actuated, the signals of the sensors
such as wheel sensor, flow meter etc. are detected and transmitted to the computer in the control
box via the SHC box.
The supply of current is via the current supply wire and the distribution box on the sprayer.
From the distribution box, the control box in the tractor and the SHC box are supplied with current.